Strip Lights can be Connected straight to 12V Batteries or to 12V Power Supplies.( see Power Supplies)
Multiply the Meters of 5050 Strip Lights x 14,4Watts = Size of Power Supply(Watts)
Strip Lights are Waterproof but not Recommended for Underwater installations.
The Strip Lights can be cut with Scissors on the Indicator/Lines which also have a Small Scissors Signs every 100mm.
To Add in Wire between the two Pieces of Strip Lights, Remove the Waterproofing on the Ends and Clean the Copper Dots on either side of the Indicator Lines.
Solder 1mm Insulated Wires to these Points and bridge to the Copper Points on the Oppesite End.
Insulate all Connections Well, Never let the Possitive and Negative Wires touch.
Simply Remove Double Sided Tape Covering and Stick in Place.
Grey or Red Wires are Positive, White Wires are Negative.
LED's will not work if the Wires are Connected Incorrectly.